WL WN535N2 N300 Router Setup

You are currently viewing WL WN535N2 N300 Router Setup
WL WN535N2 N300 Router Setup

By performing the WL WN535N2 N300 router setup, you can effectively enhance the WiFi signal coverage, utilizing the latest technological features. To fully enjoy the functionalities of the Wavlink N300 router device, carefully read through this comprehensive article.

Specifications of WL WN535N2 N300 Router Setup:

The N300 router adheres to the IEEE 802.11n standards, providing wireless speeds of up to 300Mbps and featuring one-touch wireless security encryption via the WPS button.

How to Access WL WN535N2 N300 Router Login Page:

1. Connect your mobile phone and laptop to the Wavlink router network.

2. Open a web browser and enter the web address wifi.wavlink.com.

3. Enter the basic credentials of the Wavlink N300 router to successfully log in and modify settings.

WL WN535N2 N300 Router Setup Using WPS Method:

1. Place the router, extender, and your device in the same location.

2. Connect your host router and extender to power outlets.

3.Press the extender’s WPS button and then the router’s WPS button until the LED starts blinking.

4. Within minutes, press the existing extender’s WPS button to establish a connection.

5. Check for solid LEDs on both devices, indicating a successful connection.

6. Utilize the router’s touch link button to connect your device.

Troubleshooting Tips After WL WN535N2 N300 Router Setup:

1. Turn ON/OFF Your Wavlink Router:

   – Power off your router for a few minutes to address overheating issues.

   – Wait for the router to cool down and power it on to ensure proper functionality.

2. Verify All Cable Connections:

   – Inspect all cable connections for damage and replace any faulty cables.

   – Ensure cables connect securely to the correct ports.

3. Upgrade Wavlink Router Firmware:

   – Connect the router and computer using an Ethernet cable.

   – Visit the official website of Wavlink router wifi.wavlink.com.

   – Download and update the router firmware, then restart your computer.

4. Reset Your Wavlink Router:

   – Locate the reset hole button on the router’s back.

   – Press the reset hole button with a paperclip for 8 to 10 seconds to reset the router.

   – After the reset, perform the router setup again.

If you encounter any issues with your Wavlink N300 router device, contact the Wavlink technical team.

Common Wavlink Extender Setups:

Some Issues You Might Face:

  • Login issues with Wavlink
  • Wavlink.com’s WiFi is down.
  • WiFi extender not functioning
  • WiFi repeater not functioning
  • WiFi extender password not working
  • Ethernet extender not functioning
  • Not functioning Wavlink router
  • IP Fix Not Connecting
  • Fix for Wavlink Yellow Light Problem
  • Wavlink Red Light Problem

For further assistance, please contact us, and we will be happy to help you.


Elevate your network experience with a well-optimized WL WN535N2 N300 router setup. Follow our guide, troubleshoot effectively, and explore additional Wavlink extender setups for a robust and reliable network.

Leave a Reply