Reset wireless-N repeater

You are currently viewing Reset wireless-N repeater
reset your wireless-N repeater

Wireless-N repeaters are fantastic tools for boosting your Wi-Fi signal and eliminating dead zones. But sometimes, they can encounter glitches, requiring a reset. Whether you’re experiencing connectivity issues, slow speeds, or configuration problems, reset your wireless-N repeater can often be the solution.

Why Reset Your Wireless-N Repeater?

Here are some common reasons why you might need to reset your wireless-N repeater:

  • Forgot the Wi-Fi password: If the password for your repeater eludes your memory, no worries! A reset is the key to a fresh start, letting you set it up anew.
  • Connectivity issues: If your devices are having trouble connecting to the repeater’s network or experiencing frequent disconnections, a reset can sometimes resolve these issues.
  • Slow speeds: If you’re experiencing noticeably slower speeds than usual, resetting the repeater might help clear up any software conflicts or configuration errors.
  • Configuration changes:Should you decide to tweak the settings of your primary router, consider performing a reset to ensure the repeater establishes a proper connection and functions smoothly.
  • Troubleshooting: Resetting the repeater is often a recommended troubleshooting step for various issues.

Two Ways to Reset Your Wireless-N Repeater

There are two primary ways to reset your wireless-N repeater: through the web interface at or by using the physical reset button.

1. Resetting via Web Interface

  • Establishing a connection with the repeater’s network: Utilise a Wi-Fi-capable gadget, such as a laptop or smartphone, to link up with the wireless network generated by your repeater. The network name might closely resemble your primary Wi-Fi network, supplemented with “_EXT” or “_REP.”
  • Access the web interface: Initiate a web browser on your connected device and input the default IP address of your repeater into the address bar, typically set as
  • Logging into the repeater: Input the designated username and password for your repeater, usually found on the device’s underside or within the user manual.
  • Locate the reset option: Identify a menu selection associated with “Factory Reset” or “Restore Defaults,” often situated within the “System” or “Administration” settings.
  • Verify the reset: Once the reset option is located, activate it and confirm your intention to proceed. Subsequently, the repeater will erase all configurations and initiate a self-restart.

Note: After resetting the repeater, you’ll need to set it up again from scratch. This includes configuring the network name, password, and any advanced settings you wish to use.

2. Resetting with the Physical Button

  • Find the reset button: Gently flip your repeater and explore its back or bottom until you find a tiny hole labelled “Reset.”
  • Press and hold the button:Equip yourself with a trusty paperclip or a similar tool, then delicately press and hold the reset button for approximately 10 seconds.
  • Release the button : Once the repeater’s lights begin to blink, it’s safe to release the button. At this point, the repeater will automatically go back to its original factory settings.

Note: Similar to the web interface method, you’ll need to reconfigure the repeater after a reset via the physical button.

Troubleshooting Reset Issues

If you’re having trouble reset your wireless-N repeater, here are a few troubleshooting tips:

  • Verify the correct IP address: Ensure you enter the accurate default IP address corresponding to your specific repeater model. You can find this information in the user manual or on the manufacturer’s official website.
  • Clear your browser cache and cookies: Before accessing the web interface, try clearing your browser’s cache and cookies to ensure a seamless connection.
  • Try a different browser or device: If you’re having trouble accessing the web interface on one device, consider switching to another browser or trying a different device.
  • Check the physical button: Confirm you’re pressing the correct button and holding it for the specified duration to initiate the reset process.
  • Contact the manufacturer: If you’ve tried all troubleshooting options and the repeater still won’t reset, reach out to the manufacturer’s customer support for additional assistance. They’ll offer further guidance and support.


Hasako wifi Extender Setup

Loom Wireless Extender Setup

Generic Wifi Extender Setup 

Reset Wavlink Extender

How to Update firmware on Wavlink Extender ?


In the vast ocean of networking, your Wireless-N repeater is the captain steering the ship. Armed with the knowledge of resetting, updating firmware, and configuring as an access point, you’re now equipped to conquer any connectivity challenge. Remember, technology evolves, but with the right knowledge, so do you.

 Frequently Asked Questions (FAQ):

  1. How often should I reset my Wireless-N repeater?

It’s advisable to reset when encountering connectivity issues or at least once every few months for optimal performance.

2. Can I reset using the WPS method if I’ve forgotten my login credentials?

Yes, the WPS method provides an alternative reset option, bypassing the need for login credentials.

3. Are firmware updates mandatory?

While not mandatory, firmware updates are crucial for enhancing security, fixing bugs, and improving overall performance.

4. Can I use any browser to access the Web Interface?

Yes, most modern browsers are compatible. However, Chrome, Firefox, or Safari are recommended for a seamless experience.

5. Is it possible to revert the repeater to factory settings during a reset?

Yes, a factory reset is often part of the process, returning the device to its default state.

Leave a Reply