Why my Wavlink Outdoor Extender is not connecting with Windows Laptop 

You are currently viewing Why my Wavlink Outdoor Extender is not connecting with Windows Laptop 
Wavlink Outdoor Extender

Addressing connectivity glitches between your Wavlink Outdoor Extender and Windows Laptop can pose a challenge, yet deciphering the potential triggers and applying suitable solutions can efficiently remedy the situation. Let’s unravel the common culprits behind connection breakdowns involving the Wavlink Outdoor Extender.

  1. Incorrect extender placement: Place the extender within the boundaries of your current Wi-Fi network range, ensuring a moderate distance from the router to steer clear of potential signal clashes.
  2. Outdated drivers: Ensure your laptop’s network drivers are up to date to maintain compatibility with the extender.
  3. Incorrect extender settings: Verify that the extender’s Wi-Fi network name (SSID) and password match those of your existing network.
  4. Physical damage: Inspect the extender for any signs of physical damage, such as cracked cables or damaged ports, which could disrupt connectivity.

Establishing a Connection Using WPS (Wi-Fi Protected Setup)

The WPS method offers a quick and straightforward way to connect your Wavlink Outdoor Extender to your Windows Laptop:

  1. Ensure WPS is enabled on your router:To enable WPS mode, find the WPS button on your router and push it for a few seconds.
  2. Initiate WPS pairing on the extender: Once the extender’s LED light starts blinking quickly, press the WPS button on it.
  3. Windows connection setup:Click the Wi-Fi icon in the taskbar of your Windows laptop, choose the network name (SSID) of the extender, and then click “Connect.”” Windows will automatically configure the connection using WPS.

Establishing a Connection Using the Web-Based Method

If WPS isn’t an option, effortlessly link your Wavlink Outdoor Extender to your Windows Laptop through the user-friendly web-based method:

  • Establish a connection: Using an Ethernet cable, link the extender’s LAN port to your laptop’s Ethernet port.
  • Access the extender’s web interface: Launch a web browser on your laptop and input the extender’s IP address, commonly “,” into the address bar.
  • Log in with default credentials: Employ the default login details, typically “admin” for both the username and password.
  • Configure wireless settings: Navigate to the “Wireless” settings section and input your current Wi-Fi network’s SSID and password.
  • Save and implement changes: Select “Save” or “Apply” to implement the updated settings.

Logging into the Wavlink Outdoor Extender

Accessing the Wavlink Outdoor Extender’s web interface allows you to manage and configure its settings:

  1. Connect to the extender: Connect your laptop to the extender’s Wi-Fi network or via an Ethernet cable.
  2. Open a web browser: Launch a web browser on your laptop.
  3. Enter the extender’s IP address: In the address bar, type the extender’s IP address, typically “”
  4. Default login credentials: Enter the default login credentials, usually “admin” for both username and password.

Resetting the Wavlink Outdoor Extender

Performing a factory reset will restore the Wavlink Outdoor Extender to its default settings, erasing any custom configurations:

  1. Locate the reset button: Identify the small reset button on the extender, often recessed or near the power port.
  2. Use a pointed object: Using a pen, paperclip, or similar tool, gently press and hold the reset button for 10-15 seconds.
  3. Power cycle the extender: Unplug the extender’s power cable and wait for at least 30 seconds. Plug the power cable back in and allow the extender to reboot fully.
  4. Default login credentials: After the reset, use the default login credentials, typically “admin” for both username and password.

Firmware Update for the Wavlink Outdoor Extender

  • Secure the Most Recent Firmware: Head over to the Wavlink website and snag the latest firmware file tailored to your extender model.
  • Establish a Connection with the Extender: Link up your laptop to the extender either through the Wi-Fi network or with the assistance of an Ethernet cable.
  • Enter the Extender’s Digital Realm: Launch your preferred web browser and punch in the extender’s IP address, usually the familiar “”
  • Embark on the Firmware Upgrade Expedition: Initiate the journey to find the firmware update section. It’s a breeze to ensure your extender stays in top-notch condition.


Wifi.wavlink.com not accessible what to do?

How to Fix Yellow Light Issue on Wavlink Extender

Why my smartphone is not connecting with wavlink_n?

How to Fix Wavlink Extender Flashing Red Light Issue

Galaway WiFi Extender Setup 

Leave a Reply