There are many reasons why your smartphone is not connecting with wavlink_n may not be working because of a network or signal outage, an incorrect device setting, An incorrect network password or a phone case that is excessively bulky may impede the connection

Here are the most common reasons your smartphone is not connecting with wavlink_n:

1. The Wi-Fi signal may be disrupted: Another Wi-Fi or other external signal or frequency may interfere with the Wi-Fi signal you’re attempting to connect to, disrupting and breaking the connection.

2. Your network or password is incorrect: Your network’s default SSID (network name) and password should be listed on your extender (or provided to you if you’re using public Wi-Fi)

3. Your modem signal is blocked or distant:You won’t be able to connect to Wi-Fi if your smartphone device is too far away from the modem. A concrete or metal wall can also interfere with your signal. Moving closer to your internet router may help.

4. You have a damaged or inappropriate cable: Cables can wear out just like any other piece of hardware. If they’re damaged, you might be unable to connect to Wi-Fi. If you changed routers or modems recently, try changing the connecting cables too.

5. You have a defective or incompatible cable: Cables, like any other piece of hardware, will eventually wear out. If they are damaged, you may be unable to connect to Wi-Fi. If you recently replaced your router or modem, try replacing the connecting cables as well.

6. You’ve reached your data limit: While mobile internet frequently has a data limit, some Internet Service Providers (ISPs) can also impose a limit on home network traffic. It’s possible that you’ve reached your data limit and your Wi-Fi is no longer operational as a result.

7. Your case is either too thick or blocks the Wi-Fi signal: Some phone cases are so large that they interfere with smartphone Wi-Fi connectivity. If your device frequently overheats, which could be due to the case, it can also cause connection issues

8. Your phone is infected: Malware can infect mobile phones just like other devices (ransomware is a notoriously tricky variety), and it can severely disrupt your Wi-Fi connection, among other things.

How to connect a smartphone with SSID (wavlink_n)?

Before connecting, make sure you take note of the following:

• Wireless network name (SSID) 
• wireless security key or pass
• wireless encryption mode (WEP, WPA, WPA2)

To proceed, follow these instructions below:

• Select Settings from the Home screen menu.
• Tap Wi-Fi Settings after opening Wireless & Networks.
• Turn on the Wi-Fi on your phone.
• Tap Add Wi-Fi network under Wi-Fi networks.
• Enter the SSID of the network.
• Select the security type that your network employs.
• Fill in the network password.
• Save the file.

How you resolve the problem when your smartphone not connecting with wavlink_n?

There could be various reasons behind the issue. Here are common troubleshooting steps when smartphone is not connecting with wavlink_n:

• Reboot your phone.
• Restart the extender
• Set aside Wi-Fi and reconnect
• Turn on and off flight mode.
• Examine the parental controls or data-saving settings.
• The phone should be updated
• Reset your phone’s network settings.

1. Restart your phone. A simple restart can sometimes solve the problem. This is due to the fact that it forces apps that may have crashed or caused problems to close and restart.

How do you restart an Android phone?

• Hold down the power/lock button for 2–5 seconds.
• Select Restart.

2. Reboot extender: If restarting your phone does not solve the problem, there could be a problem with your extender To get the connection working again, try resetting it.

How do you reset a extender?

• For 30 seconds, unplug your modem or router.
• Reconnect it and wait a few minutes.
• Check your Wi-Fi connection on your phone and make sure the Wi-Fi light is turned on.

3. Forget Wi-Fi and reconnect: Resetting your phone’s Wi-Fi connection can sometimes get it working again. To accomplish this, simply disconnect from the Wi-Fi network and reconnect to it.

How to forget Wi-Fi and reconnect on Android?

• Launch the Settings app.
• Select Network & Internet.
• Connect to the Internet
• Tap Forget after selecting the Wi-Fi network you’re attempting to connect to.

4. Toggle flight mode on and off: If your phone is in aeroplane mode, your Wi-Fi may not connect. Even if your phone isn’t in aeroplane mode, you can test this by turning it on and off to see if it helps you reconnect to Wi-Fi.

How to toggle flight mode on Android?

• Swipe down from the top of your screen to reveal a menu. 
• Tap Aeroplane mode once to enable it, and once more to disable it.

5. Check parental control or data saver settings: You can limit the data used by specific apps in your phone’s settings. This assists in setting parental controls and saving data on apps that consume a lot of it. 

How can I check Android’s data saver settings?

• Launch the Settings app.
• Navigate to Network & Internet.
• Choose Data Saver.
• Check to see if Use Data Saver is turned on; if so, turn it off and check your connection.
• You can also go one step further and choose Unrestricted data to see which apps are restricted when the data saver is turned on
• When in data saver mode, toggle on any apps you want to unrestrict.

6. Update phone: Phones require software updates to keep their systems current and functional. If your software is out of date, it may affect your Wi-Fi connection or slow down your phone.

How to update Android software:

• Launch the Settings app.
• Scroll down to System Update and, if necessary, follow the on-screen prompts to update your device.

7. Reset phone network settings:To attempt resolving your Wi-Fi issues, reset the network settings on your smartphone.

How to reset network settings on Android

• Launch the Settings app.
• Scroll down and choose System.
• Scroll down and select the Reset Options option.
• Choose Reset Wi-Fi, Mobile, and Bluetooth.
• Select Reset Settings.

Сonclusion for smartphone not connecting with wavlink_n

Wi-Fi has become ingrained in our lives, and it is now an essential tool for completing daily tasks, communicating, and even working. We hope the steps in this guide helped you restore your phone’s Wi-Fi connection and your problem when your smartphone is not connecting with wavlink_n get resolved.

Read more:

• aigital WiFi Repeater Setup
• Wavlink AC600 USB Adapter Setup
• Uppoon WiFi extender Setup
• fortrehui wifi extender setup
• EJRR WiFi extender Setup

FAQ’s for smartphone not connecting with wavlink_n