Wavlink WiFi 5 Extender Setup 

You are currently viewing Wavlink WiFi 5 Extender Setup 
Wavlink WiFi 5 Extender Setup 

Several repeaters support the Wavlink WiFi 5 Extender Setup , enhancing internet coverage when connected to routers. This applies regardless of whether your home router is from the same or a different brand, and whether it features a Wavlink WiFi 5 Extender Setup via WPS button. The WL WN579A3 1200M extender setup is universally compatible with any router.

Fortunately, repeaters falling under the WiFi 5 setup category, such as WL WN575A4 AC1200, WL WN583A6 AC2100, and others, can be effortlessly installed with simple setup procedures. All you need is any device and a router with an active internet connection. To initiate the Wavlink WiFi 5 Extender Setup process or learn more about these products, refer to the information provided below.

Wavlink WiFi 5 Extender Setup Guide

Upon acquiring any repeater from the Wavlink WiFi 5 Extender Setup  series, you will be provided with the extender unit, an Ethernet cable, and a concise setup manual. This guide swiftly encompasses fundamental setup details and other pertinent information. Additionally, the login credentials, default web address, and IP address will be clearly outlined in the setup guide. The extender itself features indicators such as power and WPS LEDs on its panel to signify its operational status. Furthermore, it is equipped with a reset button in conjunction with the power and WPS buttons.

Wavlink WiFi 5 Extender Setup Through WPS Button

The installation of the Wavlink WiFi 5 extender setup is both rapid and straightforward, requiring no utilization of a web browser on the device.

  • Begin by assembling the hardware components of the WL WN579A3 1200M extender.
  • Next, insert the extender into a power outlet to enable connectivity.
  • Position the router in close proximity to the extender for enhanced connection.
  • Press and hold the WPS button on the extender for a few seconds.
  • Subsequently, promptly utilize and press the WPS button on the router.
  • As a result, the LEDs on both devices will initiate blinking.
  • Following this, they will transition to a steady and solid color.
  • After completing these steps, link your device to the extender network.
  • This process concludes the WPS configuration in this manner.

Wavlink WiFi 5 Extender Setup via Web Portal

In case the home router does not have a WPS button, then utilize another configuration method for the WiFi 5 extender setup.

  • To employ this method, position the extender, router, and device in close proximity. 
  • Prepare the extender for setup by connecting it to a power source. Next, establish a connection between your mobile, laptop, or PC and the extender network.
  • For wireless connectivity, choose the network from the device’s list. Alternatively, for wired connection, insert the Ethernet wire ends into the device and extender ports. 
  • Subsequently, launch any web browser on the connected device.
  • Enter the extender’s default web address, “wifi.wavlink.com,” into the browser’s search tab
  • press enter to access the extender login and setup portal. On the subsequent screen, enter the extender’s login credentials in the provided field.
  • Upon completing the sign-in process, proceed to set up the extender. 
  • Finally, select the network, input the required details, and perform essential steps to conclude the setup process.

Some Issues You Might Face while Wavlink WiFi 5 Extender Setup

  • Wavlink login is not functioning.
  • Not functioning is WiFi.wavlink.com
  • my wifi extender not functioning? 
  • Why does my wifi repeater not function?
  • Router Wavlink is not functioning
  • Unable to Establish an IP Fix Resolve 
  • Wavlink Red Light Problem and Wavlink Yellow Light Issue

If you are facing any issues then please contact us, and we will be happy to help you.

Troubleshooting Tips For Wavlink WiFi 5 Extender Setup 

There may be some hurdles while you use Wavlink WiFi 5 Extender Setup, To eliminate them, try to find their cause before applying the solutions.


  • The power sockets might be broken or damaged.
  • The internet connection on the router is inactive.
  • There could be errors in the home router’s operation.
  • Wires may show signs of wear and tear.
  • Incorrect login details for the extender may be used.
  • Finally, the extender’s web or IP address may be incorrect.


  • Alter the extender’s power sockets and reposition it.
  • Substitute the wires used for the connection.
  • Disconnect the extender, and after a brief period, plug it in again.
  • Ensure the use of accurate login details, web, or IP address.
  • Update the firmware version of the extender.
  • Perform a reset if necessary.

Common Wavlink Extender Setups


Which Repeater Models Supports The Wavlink WiFi 5 Extender Setup?

A number of repeaters in the series are part of the Wavlink WiFi 5 extender setup. WL WN576G3 AC1200, WL WN579G3 AC1200, WL WN579X3 AC1200, and so forth are examples of these. Every one of these extenders utilizes the newest technological features.

How Can I Connect My WiFi 5 Extender Setup To The 5GHz band?

Navigate to the settings of your extender and select the Connect to network option under the Wireless settings. There, make a new SSID for the 5GHz band, then select Save.

How Do I Connect My Extender Without Using The WPS Button?

You can configure the extender using the web-based setup page in addition to the WPS method. Look up the default IP address or web address of the extender and enter your login information there. Finally, go to the next page and begin the setup process.

What is the Wavlink WiFi 5 Extender and its purpose?

The Wavlink WiFi 5 Extender is designed to enhance wireless coverage, eliminate dead zones, and improve overall network performance in your home or office.

Can I use the Wavlink WiFi 5 Extender with any router?

Yes, the Wavlink WiFi 5 Extender is generally compatible with most routers, providing flexibility in extending your network.

How can I troubleshoot if the Wavlink WiFi 5 Extender is not working?

Check the power supply, connections, and follow troubleshooting tips provided in the user manual. Contact Wavlink support if issues persist.

Leave a Reply