WL WN518W2 N300 extender setup ensures signal coverage throughout homes and offices in all directions. The installation process is quick and can be completed in just a few minutes. To understand how to utilize this Wavlink extender device, carefully follow the steps outlined below.
Specification Of WL WN518W2 N300 extender setup
- IEEE 802.11 a/bg/n is compatible with this wavlink extender.
- It uses the internet’s fastest wireless speed.
- The Ethernet WAN/LAN ports of the WL WN518W2 N300 extender setup offer auto-negotiation at 10/100Mbps.
- With the WiFi-protected system button, it features one-touch WiFi security encryption.
- PPPoE, both static and dynamic IP addresses, and WISP internet access all support it.
Benefits Of WL WN518W2 Extender
- Its high-gain external antennas allow it to transmit WiFi signals throughout the home and business.
- Additionally, there is an improved chip for stability.
- This extender is very simple to install with the router.
Login Process Of WL WN518W2 N300 Extender Setup
- First, use an Ethernet cable to connect your computer to the WL WN518W2 N300 extender network.
- In the location field, type the web address wavlink.com after launching a browser.
- The Wavlink extender login screen will then appear on your screen.
- Next, enter all of the credentials that are displayed on the screen.
- You will now be able to log into the Wavlink extender successfully as a result.
Do WL WN518W2 N300 Extender Setup By Web UI
- As soon as you log into the Wavlink extender, navigate straight to the configuration page.
- On the following navigation page, fill in a few details and perform some simple tasks.
- Make sure you adhere to each step of the display, step by step.
- Choose the network that you wish to expand now.
- In addition, provide the necessary information, including your username and security password.
- The manual guide will help you obtain the Wavlink extender security password with ease.
- Admin will be the main focus. So, fill in this and press Enter in the required field.
With the help of this web UI method, your WL WN518W2 N300 extender setup process is complete. If not, then try another method.
WL WN518W2 N300 Extender Setup By WPS Method
- First, plug the Wavlink extender into a power source.
- Now, connect your Wavlink extender to the device that your internet service provider sent you.
- Within two minutes of the internet provider device’s WPS button being enabled, press the Wavlink extender’s WPS button.
- as soon as the solid blue signal LED begins to flash.
- Thus, it indicates that the WPS connection process was completed successfully.
After trying the above two mentioned methods you will successfully do the WL WN518W2 N300 extender setup process is now completely done.
Working Issues With The Wavlink Extender
You can face numerous working issues with the WL WN518W2 N300 extender setup. These are several problems that you may face while configuring your Wavlink WiFi repeater.
- not having a computer or laptop internet connection.
- There are issues with the security password.
- Moreover, wavlink.com is not functioning properly as a web address.
- Even if you can see the WiFi signal, you are unable to connect.
- The device does not automatically recognize the WiFi signal.
Troubleshoot All These Issues
- Check the WiFi connection.
- Examine the settings of the Wavlink extender.
- View the settings for the WL WN518W2 extender.
- Check the Wavlink extender’s firewall settings.
- Examine the DHCP settings on the router.
Note: After trying these Wavlink extender troubleshooting tips , if issue is not solved then try the lower additional tips.
Upgrade WL WN518W2 Extender Firmware
- Start by going to the web management page for the WL WN518W2 extender.
- This time, look for an administration option before selecting the firmware upgrade option.
- Additionally, give yourself some time to download the most recent firmware file onto your computer and laptop.
- To finish this upgrade, restart your Wavlink extender.
Reset Wavlink Extender
- Using a paperclip, press the Wavlink extender’s reset hole button for eight to ten seconds.
- The Wavlink extender’s LEDs will all go out. This completes the WL WN518W2 extender’s reset procedure.
Note: You will need to repeat the WL WN518W2 N300 extender setup process after the Wavlink router has been reset.
Is the WL WN518W2 Extender easy to set up?
Yes, the extender setup is designed for ease of installation, allowing users to complete the process quickly and efficiently.
What connectivity options are available with the WL WN518W2 Extender setup?
The setup offers 10/100Mbps auto-negotiation for Ethernet WAN/LAN ports, providing versatile and reliable connectivity.
How is WiFi security addressed during the WL WN518W2 N300 extender setup?
The extender features one-touch WiFi security encryption through the WiFi-protected system button, ensuring a secure network connection.